|Generate QR code
Open Access
Subscription Access
Additive manufacturing of metal and ceramic powder materials
Abstract
The article describes the advantages, limitations and ways to improve the additive production of metal and ceramic powder materials, the main stages of the complete production cycle construction and the main parameters determining the structure and properties of the products produced.
About the Authors
A. Ilyushchenko
Институт порошковой металлургии; ГНПО порошковой металлургии
Belarus
Belarus
Alexander Ilyushchenko
T. Talako
Отделение физико-технических наук
Belarus
Belarus
Tatyana Talako
A. Letsko
НИЛ №15
Belarus
Belarus
Andrey Letsko
References
1. Ильющенко А.Ф. Аддитивные технологии и порошковая металлургия: монография / А.Ф. Ильющенко // Национальная академия наук Беларуси; Институт порошковой металлургии имени академика О.В. Романа. – Минск, 2019.
2. Dawes J. Introduction to the additive manufacturing powder metallurgy supply chain / J. Dawes, R. Bowerman, R. Trepleton // Johnson Matthey Technol. Rev. 2015. Vol. 59. No3. P. 243–256.
3. M. Heynick. Additive manufacturing of metals: a review // Proc. Of MS&T11, Additive Manufacturing of Metals. – Columbus, Oh. 2011. P. 1413–1425.
4. А.Ф. Ильющенко, А.И. Лецко, Т.Л. Талако // Порошковая металлургия: Респ. межвед. сб. науч. трудов. – Минск, 2017. Вып. 40. С. 48–53.
5. Introduction to additive manufacturing technology. A guide for designers and engineers // EPMA V2-REVISED. N12. 2012. P. 44.
6. Optimum Part Build Orientation in Additive Manufacturing for Minimizing Part Errors and Support Structures / P. Das [et al.] // Procedia Manufacturing. 2015. N1. P. 343–354.
7. Gaynor A.T. Topology optimization considering overhang constraints: Eliminating sacrificial support material in additive manufacturing through design / A.T. Gaynor, J.K. Guest // Structural and Multidisciplinary Optimization. 2016. N54. P. 1157–1172.
8. Additive manufacturing of metallic components – Process, structure and properties / T. DebRoy [et al.] // Progress in Materials Science Prog. 2018. N92. P. 112–224.
9. Рудской А.И. Аддитивные технологии. Материалы и технологические процессы: монография / А.И. Рудской [и др.]. – СПб., 2021.
10. Defects and anomalies in powder bed fusion metal additive manufacturing / А. Mostafaei [et al.] // Current Opinion in Solid State and Materials Science. N26. 2022.
11. Metal Additive Manufacturing Cycle in Aerospace Industry: A Comprehensive Review / B. Barroqueiro [et al.] // Journal of Manufacturing and Materials Processing. 2019. N6.
12. Singh S. Material issues in additive manufacturing: A review / S. Singh, S. Ramakrishna, R. Singh // Journal of Manufacturing Processes. – 2017. Vol. 25. P. 185–200.
13. Diener S. Literature review: Methods for achieving high powder bed densities in ceramic powder bed based additive manufacturing / S. Diener, A. Zocca, J. Günster // Open Ceramics. 2021. N8. P.100191b.
14. Direct laser sintering of a silica sand / Y. Tang [et al.] // Materials and Design. 2003. N24. P. 623–629.
15. An investigation of rapid prototyping of sand casting molds by selective laser sintering / G. Casalino [et al.] // Journal of Laser Applications. 2002. N14. P. 100–106.
16. Ceramic components manufacturing by selective laser sintering / P. Bertrand [et al.] // Applied Surface Science. 2007. N254. P. 989–992.
17. Sercombe T.B. Rapid manufacturing of aluminum components / T.B. Sercombe, G.B. Schaffer // Science 301 (2003) 1225–1227.
18. M. Geiger (Ed.). Laser Assisted Net Shape Engineering 2: Proceedings of the 30th International CIRP Seminar on Manufacturing Systems – LANE’97, Meisenbach, Bamberg, 1997. Erlangen, September 23–26.
19. Materials for additive manufacturing. CIRP Annals / D. Bourell [et al.] // Manufacturing Technology. 2017.
20. Electron beam sintering of ceramics for additive manufacturing / A.S. Klimov [et al.] // Vacuum. 2019. N169 P. 108933.
21. Development of a new calcium phosphate powder-binder system for the 3D printing of patient specific implants / A. Khalyfa [et al.] // Journal of Materials Science: Materials in Medicine. 2007. N18. P. 909–916.
22. Microwave Sintered 3D Printed Tricalcium Phosphate Scaffolds for Bone Tissue Engineering / S. Tarafder [et al.] // Journal of Tissue Engineering and Regenerative Medicine. 2013. N7, 8. P. 631–641.
23. D.J. Thomas. 3-D printing of polymer-derived CMCs for next-generation turbine blade manufacture // American Ceramic Society Bulletin. 2017. N96. P. 28–30.
24. Short fiber reinforced 3D printed ceramic composite with shear induced alignment / D.E. Yunus [et al.] // Ceramics International. 2017. N43(15). P. 11766–11772.
25. Diener S. Literature review: Methods for achieving high powder bed densities in ceramic powder bed based additive manufacturing / S. Diener, A. Zocca, J. Günster // Open Ceramics. 2021. N8. P. 100191b.
Review
For citations:
Ilyushchenko A., Talako T., Letsko A. Additive manufacturing of metal and ceramic powder materials. Science and Innovations. 2024;(6):28-37. (In Russ.)
Views: 49
Email this article 